Welch Allyn CP100 And CP200 Software Upgrade Instructions - Installation Guide - Manual (Page 5)

CP 100/CP 200 Electrocardiographs – Software Release 2.2
5 of 8
To enable the artifact report, press the Menu key. Choose ECG Settings > Miscellaneous > Artifact
Report > On. See Figure 5.
Figure 5
2. Heart Rate
CP 100, CP 200
Both the CP100 and CP200 now have a four-beat average heart rate (HR) in real-time displayed on the
screen. This is available on the following displays:
CP100 - Ready, Acquisition and Rhythm
CP200 – Preview, Acquisition, Post Acquisition and Rhythm
See Figure 6.
CP100 HR Ready Screen CP200 – HR Preview Screen
Figure 6