Welch Allyn Network Installation Best Practices Overview - Installation Guide - Manual (Page 8)

4 Best practices Welch Allyn Network installation
Critical for Connex CS and Connex RMS
Best practice Affected types Without best practice
Ports allowed
•
TCP: 281, 283
• UDP: 291, 7711-7719, 44435-44436 (only if Spot LXi is used
with Connex)
Wired Connections cannot be established.
Rendezvous Perform at least one of the following:
•
Allow UDP broadcasts on ports 7711-7719, or 44435-44436
(only if Spot LXi is used with Connex)
• DNS name resolution for Connex servers using a locally
configured name
• Configure the device with a fixed IP address of the Connex
server
Wired Connections cannot be established from the Welch
Allyn VLAN to the server.
SSID/Radio settings
•
a band Only
Wireless Loss of connection and data, patient monitor will not
connect.