beautypg.com

Welch Allyn Cardioperfect Workstation Software Installation - Quick Reference Guide User Manual

Page 2

background image

2

CardioPerfect

®

Workstation software installation quick reference

To configure the ABPM module for a USB serial adapter

If you are using a Keyspan USB serial adapter, configure the ambulatory
blood pressure (ABPM) module as follows:

1.

Install the Keyspan software. Follow the Keyspan instructions.

2.

Select Start > Programs > Keyspan > USB Serial Adapter.

3.

Select Keyspan Serial Assistant.

4.

Verify which COM port is assigned to the adapter.

5.

Start the CardioPerfect Workstation software

.

6.

Select File > Settings > Ambulatory blood pressure.

7.

Select Advanced.

8.

Match the COM port to the Keyspan Serial Adapter Assistant.

To configure the ABPM module for an RS232 cable

1.

Start the CardioPerfect Workstation software

.

2.

Connect the RS232 cable to an available CPU COM port.

3.

Go to File > Settings > Ambulatory blood pressure.

4.

Select Advanced.

5.

Select the proper COM port.

See also other documents in the category Welch Allyn Equipment: