Re-calibrating the touch screen, Replacing the system fuse, Adjustments – Vinten Radamec Fusion FCS-16 User Manual
Page 39
37
Re-calibrating the touch screen
If the on-screen pointer no longer matches the operators finger position when using the touch screen, select
the touch screen re-calibration desktop short-cut icon and run the application. For more detail please refer to
the touch screen monitor user’s manual included with the system.
Replacing the system fuse
The system fuse (22) is located on the underside of the control panel. To replace a fuse, unscrew the fuse hold-
er lid (22), install a new fuse and re-fit the fuse holder lid.
Adjustments
Refer to the appropriate section in the FCS-16 Fusion Control System Technical Manual (Publication Part No.
V4035-4990) if any problem is apparent. Adjustments and repairs should be carried out only by a trained en-
gineer.