Vinten Radamec Fusion CP4 - Manual (Page 21)

19
Operation
Controlling Camera Lens Movement
Zoom
Twist the joystick or press the rocker switch to adjust the position of the
zoom on the camera lens. The controls are sensitive to the amount of
movement applied.
Focus
Move the focus wheel to adjust the focus of the camera lens.
Adjusting the Focus Wheel
The drag resistance of the focus wheel can be increased or decreased
to suit the requirements of the operator. The focus wheel drag
adjustment screw is accessible on the underside of the control panel.
Using a Torx T-20 screwdriver, turn the drag adjustment screw
clockwise to increase or counterclockwise to decrease the drag
resistance of the focus wheel.
Increase
the drag
Decrease
the drag