Vinten Radamec Fusion CP4 - Manual (Page 10)

8
Installation
Power Connections
Connect the CP4 to the AC supply using the AC adaptor provided.
The CP4 can also be powered using a compatible 12 volt external
battery pack. The Anton Bauer battery gold mount (product no. V4110-
1002) can be used with the CP4. Using an Anton Bauer battery pack
provides battery life indication on the panel display.
Powering Up
Before powering up, ensure that all external cable connections have
been secured correctly.
To power up, press the on/off power switch.
The power button will illuminate and the boot-up screen appears. From
initial power up, the CP4 takes approximately 20 seconds to become
fully operational.
CAUTION! When powering the CP4 from a battery pack,
always ensure that there is sufficient charge to avoid power
failure during a show or the loss of unsaved data.
OR