Vinten Radamec Fusion CP4 - Manual (Page 18)

16
Configuration
.
Head Network Settings
The following settings can be configured
when the Network Settings tab is selected:
Software Upgrades
Occasionally, it may be necessary to upgrade the software on the CP4
control panel. This is managed with a USB memory stick.
1. Insert the USB memory stick into one of the two USB sockets on
the rear of the CP4.
2. From the Home Screen tap to open the
Main Menu and select Configuration >
System.
Tap the Set to Default button to reset
the head network settings to defaults.
The camera head network settings will
be setup automatically if DHCP is
selected. Alternatively select Manual to
enter specific network address
settings.
If manual settings have been selected,
tap the Edit button to change the IP
address, subnet and gateway details.
Axes Settings
Select the
checkbox to invert
an individual axis
Reset the field
values to default Reset Reset Reset
Network
Settings
Set to Default
Automatic
(DHCP)
Manual
Edit...
CAUTION! Always ensure that the CP4 is powered with the
AC adaptor during a software upgrade.
?
System