Vinten Radamec Fusion CP4 - Manual (Page 14)

12
Configuration
Manually Configuring Network Settings
Network settings are configured in the Edit Network Settings window.
Settings can be configured manually if this is a requirement of the
network the CP4 is connected to.
CP4 Control Settings
The control settings of the CP4 can be configured to suit the
requirements of the individual operator or system installation. This
includes changing the characteristics of the camera head controls (pan,
tilt, zoom and focus) and the brightness of the touchscreen display.
1. From the Home Screen, tap to
open the Main Menu and select
Configuration > Controls.
2. In the Controls panel the following sections are available:
Display Brightness
Tap and drag the scroll bar to adjust the brightness of the touchscreen
display.
Enter the IP address required for
compatibility between the panel
and other devices in the system.
Enter the subnet mask required by
the network.
Enter the address of the gateway
used to route IP traffic not
destined for the local network.
Adjust the brightness of the touchscreen.
IP Address
5.6.7.8
Subnet Mask
255.255.255.0
Gateway
1.2.3.4
Controls
Display
Change the characteristics of the camera
joystick control.
Change the characteristics of the camera
lens zoom control.
Change the characteristics of the camera
lens focus control.
Other configurable settings relating to
camera control.
Pan and Tilt
Zoom
Focus
Miscellaneous
Brighter Dimmer
Brightness