Universal Remote Control (URS) THZ-100 Rev 03 - Manual (Page 6)

THZ-100 T
HERMOSTAT
Installing Your THZ-100 Thermostat
Adding an optional wired sensor can be a benefit if the thermostat
location is not the optimal location for temperature measurement,
or if temperature averaging is desired.
• A wired sensor can be connected to the S+ and S- terminals
on the back of the unit
• This can be added to any of the wiring options detailed in the
next pages
For optimum performance, mount the THZ-100 thermostat and/or
remote sensor
• In an open living area where there is good air circulation
• On an inside wall
• Away from outside doors or windows
• At a height about 5 feet from the floor
Avoid installing the THZ-100 thermostat and/or remote sensor
• In direct sunlight
• Above radiators or air vents
• Near fans or portable heating units
• Near lamps or other incandescent lighting
• Near other heat generating electric appliances such as
televisions, audio video equipment, refrigerators, freezers,
ovens, cooktops, etc.
Other precautions when installing the THZ-100 thermostat and/or
remote sensor
• Make sure the cutout for the HVAC wiring is no larger than
needed to make proper connections to the thermostat
• If there is a large air gap in the cutout for the HVAC wiring,
insulate around the wire and close off the air gap
• Make sure the air vents in the THZ-100 thermostat and/or
remote sensor are clear of dirt, dust, or any construction
material.
Page 2