Universal Remote Control (URS) THZ-100 Rev 03 - Manual (Page 29)

Page 25
THZ-100 T
HERMOSTAT
Turning Emergency Heat On or Off
Emergency is staged electric or gas heating included with most heat
pump systems. Emergency Heat is activated by a malfunction in the
heat pump system or when the user manually selects the option. If
you do not have a heat pump system then the Emergency Heat feature
is not displayed in the options menu list.
If you desire to turn the emergency heat either on or off then use the
arrow keys to move the highlight bar to Emergency Heat. The current
state of the emergency heat is displayed in the right column.
If emergency heat was off then the screen displays “Are you sure you want
to turn on emergency heating?” If the emergency heat was on then the
screen displays “Are you sure you want to turn off emergency heating?”
Press the key below the Turn On or Turn Off key label in the smart-key
label at the bottom right of the display to change the state of the emergency
heat. If you decide to cancel the operation then press the key below the
Cancel key label in the smart-key label at the bottom left of the display.