Universal Remote Control (URS) THZ-100 Rev 03 - Manual (Page 23)

Page 19
THZ-100 T
HERMOSTAT
Selecting the Cooling Mode
If you desire to change the HVAC system equipment mode to cooling
mode then use the arrow keys to move the highlight bar to Cool.
Press the key below the OK key label in the smart-key label at the bottom
right of the display to select this new mode. If you decide to cancel the
operation then press the key below the Cancel key label in the smart-key
label at the bottom left of the display.
If the Climate Modes screen times out and goes back to the main screen
without pressing the OK button, no change is made to the climate mode.
In Cool mode, the thermostat activates the system equipment to cool your
home per the programmed schedule or hold temperature.
The thermostat does not activate the system equipment to heat your home
while in the Cool mode.