Universal Remote Control (URS) THZ-100 Rev 03 - Manual (Page 12)

Page 8
THZ-100 T
HERMOSTAT
Operation For Your THZ-100 Thermostat
Your THZ-100 thermostat has been programmed by the MRX Advanced
Network System Controller system with your custom HVAC schedule of
heat and cool set points for the selected time periods for each day of the
week. In addition, the thermostat has been programmed by the MRX
Advanced Network System Controller for the type of HVAC equipment,
conventional or heat pump, the number of auxiliary heat and/or cool
stages, any remote sensors, and any pass code lockout code if desired.
Thermostat Display Information
Your THZ-100 thermostat features a color backlit LCD display with all the
information you need for easy operation. The top left of the screen has the
fan mode information while the top right of the screen has the current
system mode such as Heat or Cool.
The center of the screen displays the current temperature with different
backgrounds dependent upon whether the thermostat is in Heating,
Cooling or Idle mode. The small letter F or C at the lower right of the current
temperature indicates the temperature scale.
Directly above the current temperature is the name of the program mode
that is currently running: Morning, Day, Evening, Night, Vacation, Override,
Hold, or Hold to . When the system is OFF there is no text in this
area.
Directly below the current temperature is information on the current comfort
range and the set points. This area is also used for notifications such as
Check Wireless, Check Network, or Check Filter which alternates on screen
with the set point information.