ThingMagic Nomad RFID Setup Guide - Manual (Page 33)

Nomad RFID Reader Setup Guide 33
Saving the Tag Read Data
Using the Save button, you can save the accumulated tag read data. Follow this procedure
to save your tag data:
1. In the Read Tags window, click on the Save Tags button. The Read Tags Save As
window displays.
Read Tags Save As window
2. Using the keyboard, type in a file name.
3. Select a folder from the Folder dropdown list.
4. Select the type from the Type dropdown list: .txt, doc, or .csv.
5. Select the location from the Location dropdown list: Main Memory or SD card (if
present).
WARNING: Be sure to save your data. If you exit the application or click on the Clear Reads
button before saving your data, then that data is lost.