ThingMagic Nomad RFID Setup Guide - Manual (Page 15)

Nomad RFID Reader Setup Guide 15
GPS Settings A-GPS tab
7. Click OK. The Settings window displays. GPS metadata in RFID SearchLight is now
enabled. You can now restart SatViewer. Please ensure that SatViewer is
connecting on COM3.
Setting the Time Zone
WARNING: You must set the local time zone before using the RFID SearchLight application.
Failure to do this could cause the device not to comply with local RF regulatory requirements.
Setting the time zone automatically sets the correct region for your location.
To set the time zone, do the following:
1. In the Start menu, click on Settings. This displays the Settings window.
2. Click on the System tab.