ThingMagic Nomad RFID Setup Guide - Manual (Page 32)

32 Nomad RFID Reader Setup Guide
Read Tags window
NOTE: The Total Unique Tags Found box lists the number of unique tags read. However, the
pane below may list those unique tags as being read multiple times, so the list and the count
may NOT be the same.
To read tags, do the following:
Click on the Start Read button. The Ready pane to the right changes to Reading. As you
read tags, tag data appears in the lower part of the window.
To stop reading Tags, do the following:
Click on the Stop Reads button. The pane to the right changes back to Ready.
Setting the Read Coverage distance, do the following:
Adjusting the slider increases or decreases the read distance.
Clearing Reads
Click on the Clear Reads button. This deletes all the recently scanned tag data.
Read Tags Scrolling Region with Data