ThingMagic Nomad RFID Setup Guide - Manual (Page 23)

Nomad RFID Reader Setup Guide 23
Display Format window
EXAMPLE:
EPC in hexadecimal representation:
3028354D8202028000000000
Reverse Base-36 alphanumeric
representation for human-readable text:
CHL58FYDITHJ83VN0G1
2. Click on EPC in Hex or EPC in Base 36.
3. Click Save, Cancel, or Restore Defaults.
Read Parameters
Use the Read Parameters window to set the path for read alert wav files, start scan wav
files, and end scan wav files to use and setting the Keyboard Wedge read parameters: read
duration, metadata separator, and tag metadata. The wav files are used to indicate tag
reading is enabled, the start of a tag read, and the end of a tag read.
To configure the read parameters, follow these steps:
1. Click on Read Parameters. The Read Parameters window displays.