Smart Power Systems Liberator Series - Manual (Page 40)

Smart Power
®
Systems
A. C. MODULAR GENERATOR SYSTEM
Page 39 of 54
Troubleshooting Guide
For A.C. Modular Generator System
(Reference XRT Manual for Troubleshooting Guide of rescue tool pump system)
Diagnostic:
The Command & Control Center will display certain faults that can assist a service
technician in trouble shooting a problem with the generator system. When these faults
occur, the fault message will periodically flash on the Command & Control Center,
interrupting the normal display. Reference Figure 27 for an example of an over-current
fault.
The faults can also be accessed by repeatedly pressing the mode switch. After displaying
the oil temperature, oil filter time, and configuration, the next display will be the first active
fault. Each time the Mode switch is pressed; the next fault will be displayed. When there
are no more faults to display, the Command & Control Center will return to Normal mode.
Example of high current in Line 1 fault display
Figure 27