Rice Lake Star SP700 - Manual (Page 24)

– 21 –
ENGLISH
6-3. Errors
1) Recoverable error
*1 After you insert the paper in the paper entrance, the printer loads the paper
automatically.
Confirm that the POWER lamp is flashing, and then press the FEED button.
*2 Press the FEED button.
*3 Refer to the separate installation manual of the optional near end sensor for
details.
Because the near end sensor is not installed at the time of shipment (factory
setting), the error is not displayed if the sensor is not installed.
*4 Automatically the printer is recovered after the print head has cooled.
A print head temperature error is not abnormal.
*5 Automatically the printer is recovered after the board has cooled.
*6 Automatically the printer is recovered if the cutter returns to the home position
after turning the power OFF and ON.
Restoration is also possible with the n command when in the
ESC/POS mode.
POWER lamp
On
Flashes (On: 0.25
sec./Off: 0.25 sec.)
On
Flashes (On: 1
sec./Off: 1 sec.)
Flashes (On: 2 sec./
Off: 2 sec.)
On
On
On
Buzzer
4 short beeps (0.13
sec.) repeated twice
None
None
None
None
3 short beeps (0.13 sec.
+ 0.13 sec. + 0.5 sec.)
2 short beeps (0.13 sec.
+ 0.5 sec.)
3 short beeps (0.13 sec.
+ 0.13 sec. + 0.13 sec.)
Error Description
Paper end error
Waiting for recovery of the
printer to be able to print
after loading the roll paper
Paper near end er-
ror (Option)
Head high tem-
perature detection
Board high tem-
perature detection
Cutter error (on
models with cutter)
Mechanical error (other
than cutter error)
Black mark detec-
tion error
ERROR lamp
On
Off
Flashes (On: 2 sec./
Off: 2 sec.)
Off
Off
Flashes (On: 0.125
sec./Off: 0.125 sec.)
Flashes (On: 0.25
sec./Off: 0.25 sec.)
Flashes (On: 0.5
sec./Off: 0.5 sec.)
Recovery Conditions
*1
*2
*3
*4
*5
*6
*7
*8