Rice Lake Star NP-2511 Thermal Kiosk Printer - Switch Settings - Manual

Star NP-3511 and NP-2511 DIP Switch Settings
From section 4.1.1 of the NP-2511 and NP-3511 Product Specification manual.
4.1.1 DIP switch
A single DIP switch is mounted on the control board module – it is accessible through a cutout on
the bottom of the printer.
SW No. Function ON OFF Factory setting
DS1-1 Transmit Setting See Figure 1 Off
DS1-2 Off
DS1-3 Off
DS1-4 Serial Transmit Speed See Figure 2 Off
DS1-5 Off
DS1-6 Serial Flow Control XON/XOFF RTS/CTS Off
DS1-7 Autocutter No Yes Off
DS1-8 Reserved - - Off *
* DS1-8 must be Off
Interface Bit Length Parity
Setting
DS-1 DS-2 DS-3
USB - - Off Off Off
Serial 8 Bit Nil On Off Off
Odd Off On Off
Even On On Off
7 Bit Nil Off Off On
Odd On Off On
Even Off On On
Reserved - - On On On
Figure 1
Serial Transmit Speed DS1-4 DS1-5
115200 Off Off
38400 On Off
19200 Off On
9600 On On
Figure 2