Rice Lake RoughDeck and iQUBE2 Rough-n-Ready System Addendum - Manual (Page 3)

VIRTUi 2 Installation - Rough-n-Ready System 3
8. Select
OK
, a popup appears in lower right area of the screen that indicates the connection was successful.
Figure 4. Connection Successful
9. Select
Communication
, then
Connect
to connect to the iQUBE
2
.
Connect
Disconnect
Send Configuration to iQube2
Get Configuration from iQube2
Figure 5. Connect to the iQUBE 2
10. Select
Communication
, then
Get Configuration from iQUBE2
. A popup will appear showing the progress of
the upload.
11. Select
File
, then
Exit
to close the program. Select
Save
when asked.
Connect
Disconnect
Send Configuration to iQube2
Get Configuration from iQube2
Figure 6. Updating Configuration