Rice Lake MSI-7300 Dyna-Link 2 - Manual (Page 23)

Dyna-Link Setup 19
4.2 Function Keys
The Dyna-Link 2 has two user definable function keys on the front panel that can be
programmed to several different functions. F1 is defaulted to peak hold, and F2 is
defaulted to test. This procedure also assigns the F1 & F2 keys on the optional RF
remote display.
)YQF
SCROLL
F2
SCROLL
F2
SCROLL
F2
SCROLL
F2
SCROLL
F2
ENTER/SELECT
F1
ENTER/SELECT
F1
WRWD/
blinking
QHW U
blinking
3+OG
blinking
WHVW
blinking
2II
blinking
1) With the 7300 on, press the F2
key and the POWER key
simultaneously.
2) The first item of the setup menu
is Func1.
To setup the F2 Key scroll to the next
menu item by pressing
F2 .
3) To set up the F1 key press F1 .
The current F1 key function is
displayed.
4) Select the F1 key function by
scrolling through the choices with
the
F2 key. See the list of
available functions on the setup
menu map.
This procedure scrolls through all
available choices for illustration
purposes only.
In this example, we’ll set F1 to the TEST
function.
5) When the desired F1 Key
function is displayed, press F1 .
The next item in the setup menu
appears.
6) Either press ZERO to exit setup
and store all changes, or
continue to another setup menu
item using the
F2 Key.
)YQF
Next Setup Menu Item
Store and return to
weight display
6WRUH
SCROLL
F2
SCROLL
F2
SCROLL
F2
SCROLL
F2
SCROLL
F2
SCROLL
F2
7HVW
blinking
blinking
XQLW
blinking
WDUH
blinking
YWWO
blinking
0
EXIT/SAVE
ZERO
Press Simultaneously
POWER
F2
SCROLL
F2
XQLW
blinking
SCROLL
F2
+LUHV
blinking
3ULQW
blinking
2II
blinking
0
ZERO
F1
Figure 4-2 Function Keys