Rice Lake Loadrunner Series Onboard Roll-Off Load Pin, 2.5 - Manual (Page 16)

12 LoadRunner™ Series Installation & Service Manual
3.6 Install the Indicator
Panel mount
Roof/under dash mount Dash mount
Optional Radio DIN mount
Figure 3-11. Indicator Mounting Options
If the indicator will be installed in the cab, choose an area that is easily visible to the driver. A mounting bracket is
provided.
0.71 in
(18 mm)
4.00 in
(100.5 mm)
2.50 in
(62.5 mm)
5.71 in
(145 mm)
1.73 in
(44 mm)
5.71 in
(145 mm)
4.80 in
(122 mm)
1.57 in
(40 mm)
2.32 in
(59 mm)
3.54 in
(90 mm)
3.54 in
(90 mm)
Ø 0.25 in (6.5 mm)
holes for u-brackets
0.157 in (4 mm) self taper
0.137 in (3.5 mm) deep
Panel mount holes
Important
When running cable to the indicator, use existing access hole if available, if not, a hole will need to be
drilled in the cab. Insert a grommet to protect wiring.
Do not allow cable jacket to contact bare metal edges.
Figure 3-12. Indicator Dimensions