Rice Lake Ishida IGX & IGB Series - Operation Manual - Manual (Page 17)

2.2 Calling Up the Preset Values
page 14 IGX/IGB Series Operation Manual No. 0202A
2.2 CALLING UP THE PRESET VALUES
1
Press and hold the SET key for two seconds.
“PLU 1” will be displayed.
IGX Series IGB Series
(2 sec.)
Ä
2
Press the ZERO (+) or TARE (-) key to select the desired PLU No.
IGX Series IGB Series
or Ä
3
Press the SET key to display the tare weight, the upper limit value, and the lower limit value.
IGX Series IGB Series
Ä
b
b
b
b
NOTE If no tare weight has been set, or if neither the upper limit value nor the lower limit
value has been set, the values set before pressing the SET key will remain active.