Rice Lake Ohaus Explorer Pro High Capacity Quick Start Guide - Manual (Page 2)

Explorer
®
Pro-HC Quick Start Guide
Explorer
®
Pro High Capacity Quick Start Guide ii Ohaus Corporation www.ohaus.com
CONTROLS
Button Function
In Menu mode, press to move selection bar up, highlight the activated field, or
change settings of a selected field in increasing order.
In alphanumeric field, press to increment number or letter.
In Menu mode, press to move cursor to left (eg, to change date setting).
In Application mode, press to move to the next soft key selection to the left.
In Menu mode, press to move cursor to right (eg, to change date setting).
In Application mode, press to move to the next soft key selection to the right.
In Menu mode, press to move selection bar down, highlight the activated field, or
change settings of a selected field in decreasing order.
In alphanumeric field, press to decrement number or letter.
In application modes, press Enter to accept Soft-key selection.
In menu mode, press Enter to accept and save parameter of selected items.
Press to perform Tare function or Zero function.
Mode Press to cycle through all active application modes.
Print Press to send data in Result Lines to COM port (printer or PC).
Menu
In Application modes, press to call Menu screen.
In Menu mode, press to return to application mode.
Date and time
See menu (p. 4) for setup.
Result lines display
results of balance
operations
Power On/Off Button
Unit of measure
indicator. (g=grams)
See menu (p. 4) for
available units.
Center of Zero
indicator
(LFT models)
Message line contains
instructional messages
Active Application
Indicator
Soft Keys – See
details in table.
Stability indicator
& Negative value
indicator
Capacity Bar: shading indicates capacity used –
meaning varies by application.