Rice Lake Dual Ramp Wheelchair Scale (350-10-3) - RL350-10 Operation Instructions - Manual (Page 16)

12 Rice Lake Digital Wheelchair Scale Operation Manual
Connecting software and downloads should be addressed by your IT department and can vary depending on what
type of computer platform you’re using. Basic information on USB driver installation using Windows ® is
described in the following steps and serves only as an example. The USB driver can be downloaded from the
Rice Lake Weighing Systems website at the following location; http://www.ricelake.com/software.aspx
Select Medical/Health Scales, Software and Get Downloads. Opening any product will show a USB Driver
download. Click on
Download
to open and download the driver to your computer.
1. The graphic below shows the window that pops up when the USB cable is connected to the indicator and
the scale is turned on.
Follow the screen prompts to navigate through the screens below.
2. Select
No, not this time
and then select
Next
.
3. Select
Install the software automatically
, then
select
Next
.
4. The following screen appears while the driver
is installing on to your system.
5. The following screen appears when installation is
complete. Click on
Finish
.