Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.1 - Manual (Page 73)

Counterpart User Manual - Serial Commands 67
OPTCARD Option cards NONE, FIBER, ETHERNET, WI-PORT, RESERVED, USB,
RS232-422, KEYBOARD
Command Description Values
CFGPWD Configuration password 0, 1–9999999
CONSNUM Consecutive numbering 0–9999999
CONSTUP Consecutive number start-up value 0–9999999
DATEFMT Date format MMDDYYYY, DDMMYYYY, YYYYMMDD, YYYYDDMM
DATESEP Date separator SLASH, DASH, SEMI
DECFMT Decimal format DOT, COMMA
DSPBRIGHT Sets display intensity 0 (dimmest), through 100 (brightest as a percentage)
KYBDLK Keyboard lock (disable keypad) OFF, ON
REG.AGENCY Regulatory compliance NONE, OIML, NTEP, CANADA, INDUST
REGULAT=NTEP Regulatory compliance NONE, OIML, NTEP, CANADA, INDUST
REG.CTARE Allow clear keyed tare NO, YES
REG.WORD Weighing mode Gross, Brutto
REG.KTARE Always allow keyed tare NO, YES
REG.MTARE Multiple tare action REPLACE, REMOVE, NOTHING
REG.NTARE Allow negative tare NO, YES
REG.ZTARE Remove tare on ZERO NO, YES
REG.BASE Zero base for overload calculation CALIB, SCALE
REG.PRTMOT Allow print while in motion NO, YES
REG.PRINTPT Add PT to keyed tare print NO, YES
REG.SNPSHOT Display or Scale weight source DISPLAY, SCALE
SD Set date MMDDYY, DDMMYY, YYMMDD, or YYDDMM. Enter six-digit
date using the year-month-day order specified for the
DATEFMT parameter, using only the last two digits of the year.
ST Set time hhmm (enter using 24-hour format)
TIMEFMT Time format 12HOUR, 24HOUR
TIMESEP Time separator COLON, COMMA
SK#1 - SK#12 Softkey Assignment BLANK, TIMEDATE, CLRTAR, DSPTAR, DSPACC, SCLSEL,
CODE, LOT, PRINTLOT, SWAPDSP, IN, OUT, CLRCN,
TOTAL+, TOTAL-, CLRTTL, UWUPDT, TAREUPDT, SETPT,
BATSTRT, BATSTOP, BATPAUSE, BATRST
Table 6-6. FEATURE Serial Commands
Command Description Values
Table 6-5. SERIAL Port Serial Commands (Continued)