Rice Lake Bariatric Handrail (250-10-2) - Rice Lake Digital Handrail Scale Operation Instructions - Manual (Page 7)

Digital Handrail Scale Operation Manual - Scale Assembly 3
3.0 Scale Assembly
3.1 Unpacking Your Scale
Place the unopened box in an open area that has ample room for unpacking the scale.
Parts contained in the shipping box include:
• The scale
• This manual
• 6 mm Allen key
3.2 Repacking
If the Digital Handrail Scale must be returned for modification, calibration or repair, it must be properly packed
with sufficient packing materials. Whenever possible, use the original carton when shipping the scale back.
Important
Damage caused by improper packaging is not covered by the warranty.
3.3 Setting Up Your Scale
Move the scale into the area where the weighing process will occur. Place the scale on a hard, level surface for
the most accurate weighments.
1. Locate the operator’s manual from inside the box and set aside as it will provide instructions on the
proper set up.
2. Using two people, remove the scale out of the packaging material that it came in by lifting the scale out
of the box by the scale base.
Caution
DO NOT lift the scale out of the box by its handle as this can cause the hinges to break.
3. Gently set the scale platform down to the floor.
4. Loosen the handles using the Allen key and unfold handles and set upright.
Lift handles up
Figure 3-1. Set Up Sides to a Vertical Position
5. Adjust the feet to ensure that the base of the scale base is not touching the floor.
6. Screw in all four legs.
7. Attach the wrap around rails.
8. Tighten the hex screw head using the enclosed 6 mm Allen key to stabilize the scale.