Rice Lake 920i Wall Mount Enclosure - Manual

December 2010 69988
920i ® Programmable HMI Indicator/Controller
Wall Mount Enclosure Installation Instructions
PNs 69763, 69765, 69770, 69776, 72133, 72134
This document contains drawings, replacement parts
lists, and instructions for installing wall mount models
of
920i
indicators. See the
920i
Installation Manual,
PN 67887, for general installation and configuration
and calibration information.
Figure 1 shows the outside dimensions of the wall
mount enclosure.
The 920i has no on/off switch. Before
opening the unit, ensure the power cord is
disconnected from the power outlet.
• Use a wrist strap to ground yourself and protect
components from electrostatic discharge (ESD) when
working inside the indicator enclosure.
• This unit uses double pole/neutral fusing which could
create an electric shock hazard. Procedures requiring
work inside the indicator must be performed by
qualified service personnel only.
• The supply cord serves as the power disconnect for the
920i . The power outlet supplying the indicator must be
installed near the unit and be easily accessible.
0.75"
14.30"
19.63"
18.84"
11.00"
6.75"
PRINT UNITS
14.00"
18.00"
Figure 1. Wall Mount Enclosure Dimensions
To be the best by every measure