Rice Lake 880 Performance Series Panel Mount Indicator/Controller - Profibus DP Interface Option Installation and Programming Manual - Manual (Page 11)

Installation 7
2.2 Profibus LED Status Indicators and Connector
An LED array on the Profibus module provides status information for
troubleshooting.
• LED 1 provides network status;
• LED 2 provides status indication for the Profibus module.
Figure 2-10. Profibus Status LED Module
Operation Mode LED (Item 1)
Module Status LED (Item 2)
Status Description
Off No powered or not online
Steady Green Data exchange
Flashing Green Clear
Flashing Red (1-flash) Parametrization error
Flashing Red (2-flash) Profibus configuration error
Status Description Comments
Off Not initialized Anybus state = ‘SETUP¨’ or ‘NW_INIT’
Steady Green Initialized Anybus module has left the ‘NW_INIT’ state
Flashing Green Initialized, diagnostic
event(s) present Extended diagnostic bit is set
Steady Red Exception error Anybus state = ‘EXCEPTION’
1
2
3