Rice Lake 880 Performance Series Panel Mount Indicator/Controller - DeviceNet Interface Option Installation and Programming Manual - Manual (Page 3)

Contents i
Technical training seminars are available through Rice Lake Weighing Systems.
Course descriptions and dates can be viewed at www.ricelake.com/training
or obtained by calling 715-234-9171 and asking for the training department.
Contents
About This Manual ................................................................................ 1
1.0
Introduction............................................................................... 1
2.0 Installation ................................................................................ 2
2.1 Installing the DeviceNet Interface . . . . . . . . . . . . . . . . . . . . . . 2
2.2 DeviceNet LED Status Indicators and Connector . . . . . . . . . . 7
3.0 Commands ................................................................................ 9
3.1 Output Data Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.1.1 BYTE Swapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.2 Input Data Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.2.1 Command number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.2.2 Status Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.2.3 Value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.2.4 Setting a Float Value: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.2.5 Reading a Float Value: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.3 Command Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.0 DeviceNet Interface Specifications........................................ 20
DeviceNet Interface Limited Warranty ............................................... 21
© Rice Lake Weighing Systems. All rights reserved. Printed in the United States of America.
Specifications subject to change without notice.
Rice Lake Weighing Systems is an ISO 9001 registered company.
Version 1.0 November 12, 2013