Rice Lake 820i Programmable Indicator/Controller - Panel Mount Enclosure Installation Instructions - Manual (Page 4)

4 820i Panel Mount Installation Instructions
Replacement Parts and Assembly Drawings
Table 2 lists replacement parts for the 820i panel mount models, including all parts referenced in Figures 6 and 7.
Ref
Number PN Description (Quantity)
See Figure
No.
1 93247 Switch panel membrane (1) 6
2 94823 Enclosure, panel mount (1)
3 69291 3V Lithium coin battery
4 93015 CPU board (1)
5 94824 Housing backplate (1)
6 14839 Machine screws, 6-32NC x 1/4 (7)
7 71698 Polyurethane foam strips (2)
8 58248 Lock nuts, 6-32NC nylon (2)
9 97907 AC inlet socket assembly (1)
10 16861 High voltage warning label (1)
11 94392 Power supply bracket (1)
12 14822 Machine screws, 4-40NC x 1/4 (4)
13 67613 Power supply, ±6VDC, 25W (1)
14 67796 Power supply cable assembly, to CPU board (1)
16 53308 Model/serial number label (1)
17 14626 Kep nuts, 8-32NC (1)* 7
18 15134 Lock washer, No. 8, Type A (1)
19 16892 Ground/Earth label (1)
21 71095 Clinching bracket (1)
22 69144 Faceplate gasket (1) 6
— 93246 Display board assembly (1) —
— 15438 Power cord, 115 VAC and 230 VAC North American units (1) —
72512 Power cord, 230 VAC European units (1)
* Additional parts included in parts kit.
To protect against the risk of fire, replace fuses only with same type and rating fuse.
Table 2.Replacement Parts