3 channel set – QOMO QRF300 User Manual User Manual

Page 84

www.qomo.com

Note

Once the new ID has been set successfully, the color of the Set button changes to green. If

the set up is failure, the color changes to red.

3.5.2.3 Channel Set

To set the host main receiver channel number and the band number, follow these steps:

From the main QClick window, select

Settings

tab, then click

Remote ID

to display the

Set

Remote ID

window.

Select the

Channel Set

tab.

The software will prompt you to login again to double check if you have the authority to
change the main receiver channel.

After login, the

Set Remote ID

window displays. Enter the new channel number into the text

box next to the

Channel No.

. Then click the

Send

button

If you want to set a new band for the setting channel. Enter the new band number into the
text box next to the

Band

. Then click the send button

Click the

Close

button

to close the setting.

Note:

The valid channel number is from 0 to 49 and the valid band number is from 0 to 3.