Esc "%" n, Esc " ⁄ " n "data" cr or lf – Citizen Systems iDP3420 User Manual
Page 70
iDP3420/3421/3423 User’s Manual
54
CITIZEN
ESC "%" n
[Function]
Specifying/Canceling the download character set
[Code]
[Outline]
This command selects/deselects the download character set.
The download characters
cannot be printed by simply defining them with the above-mentioned ESC & 0 command.
To print them, send this command to the printer.
n
Download Character Set
0
30
Deselects
1
31
Selects
ESC "
⁄
" n "data" CR or LF
[Function]
Defining the Message
[Code]
<1B>H <2F>H n "data" CR or LF
[Range]
1
≤
n
≤
10
[Outline]
This command can define up to a 50-byte message in one line.
If the value of n is specified
beyond the range, the data following n will be treated as the print data.
Once the message is defined, it remains valid until it is redefined.
The data should end with
CR (0DH) or LF (0AH).
If the data exceeds 50 bytes, the subsequent data will be treated as
the print data.
Once the message is defined, it remains valid until it is redefined or the download deletion
command (ESC DC2 n1 n2) is executed.