Citizen Systems iDP3420 - Manual (Page 62)

iDP3420/3421/3423 User’s Manual
46 CITIZEN
ESC "
∗
" n1 n2
[Function] Specifying the bit image mode
[Code] <1B>H <2A>H n1 n2
[Range] 1
≤
n1 + 256
×
n2
≤
378
[Outline] This command allows printing in the bit image mode. Divide the number of dots printed by
256 and assume its quotient to be n2 and remainder to be n1. Therefore, the number of
horizontal dots will be n1 + 256
×
n2.
If the bit image data is entered beyond the dot positions printable in one line, the surplus data
will be discarded. Normal data processing is restored after bit image printing. Printing is
done in a single direction.
ESC "
−
" n
[Function] Specifying/Canceling the underline
[Code] <1B>H <2D>H n
[Outline] This command selects/deselects an underline. The underline is selected at n = 1 and
deselected at n = 0.
[Default] n = 0