Input buffer backup function, 1 buffer size, 2 input buffer backup – Citizen Systems iDP3420 User Manual
Page 42: 3 clearing the input buffer
iDP3420/3421/3423 User’s Manual
26
CITIZEN
8.
INPUT BUFFER BACKUP FUNCTION
8.1
Buffer Size
With the DIP switch, you can set either 6 K bytes or 256 bytes.
DIP switch segment 1-8
ON
→
6K bytes
OFF
→
256 bytes
8.2
Input Buffer Backup
Even if the power is turned off or fails during the printing process, the data in the input buffer will be saved.
If the power is turned on again, the printer will print a power failure mark, "==POWER DOWN==," in red
and reprints the data from the beginning of the line where it left off.
8.3
Clearing the Input Buffer
When you want to clear the data in the input buffer, turn on the power, holding down the LF switch.
A
buzzer will sound to inform you that the input buffer has been cleared.
Hold down the LF switch until the
buzzer sounds.
If the printer prints the data erroneously at power-on, clear the input buffer as described above, and
then, re-input the data.