Mercedes-Benz R-Class 2007 Owners Manual - Manual (Page 501)

500
Practical hints
Flat tire
Removing the wheel
1 Alignment bolt
̈ Unscrew upper-most wheel bolt and
remove.
̈ Replace this wheel bolt with alignment
bolt
1 supplied in the vehicle tool kit
( ୴ page 472).
̈ Remove the remaining wheel bolts.
̈ Remove the wheel.
Mounting the spare wheel
1 Wheel bolt for 18", 19", 20" and 21"
light alloy wheels and R 63 AMG spare
wheel
2 Wheel bolt for 17" light alloy wheels or
18" spare wheel (located in trunk with
spare wheel)
̈ Clean contact surfaces of wheel and
wheel hub.
! Do not place wheel bolts in sand or dirt. This
could result in damage to the bolts and wheel
hub threads.
! Wheel bolts 2 must be used when mount-
ing 17" wheels or the 18" spare wheel with
collapsible tire. The use of any wheel bolts other
than wheel bolts
2 for 17" wheels or the
18" spare wheel with collapsible tire will physi-
cally damage the vehicle’s brakes.
! To avoid paint damage, place wheel flat
against hub and hold it there while installing first
wheel bolt.
Warning!
G
Always replace wheel bolts that are
damaged or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be
repaired immediately. Do not continue to
drive under these circumstances! Contact
an authorized Mercedes-Benz Light Truck
Center or call Roadside Assistance.
Incorrect wheel bolts or improperly tight-
ened wheel bolts can cause the wheel to
come off. This could cause an accident.
Make sure to use the correct wheel bolts.