Mercedes-Benz R-Class 2007 Owners Manual User Manual

Page 243

242

Controls in detail

3-zone automatic climate control*

Air recirculation mode with
convenience closing and opening
feature

Vehicles with tilt/sliding sunroof*

Convenience closing:

Press button

: for approximately

2 seconds.

The windows and/or tilt/sliding
sunroof will close. You can release
button

: once the closing proce-

dure has begun. The windows and
tilt/sliding sunroof continue closing
until they are fully closed. The indicator
lamp on the button comes on. The air
recirculation mode is activated.

Convenience opening:

Press button

: for approximately

2 seconds.

The windows and/or tilt/sliding
sunroof will return to their previous
positions. You can release button

once the opening procedure has
begun. The windows and tilt/sliding
sunroof continue opening until they
have reached their previous positions.
The indicator lamp on the button goes
out. The air recirculation mode is
deactivated.

Vehicles with panorama roof*

Convenience closing:

Press and hold button

: until the

windows and the tilt/sliding panel are
closed or have reached the desired po-
sition. The indicator lamp on the button
comes on. The air recirculation mode is
activated.

Warning!

Never operate the windows and tilt/sliding

sunroof* or tilt/sliding panel* if there is the

possibility of anyone being harmed by the

opening or closing procedure.

In case the procedure causes potential

danger:

Vehicles with or without tilt/sliding

sunroof*: The closing of the windows can be

immediately halted by pressing or pulling

the respective window switch. The closing of

the tilt/sliding sunroof* can be immediately

halted by moving the switch for the

tilt/sliding sunroof* in any direction.

The closing of the windows and the

tilt/sliding sunroof* can be reversed by

again pressing and holding the

: button.

Vehicles with panorama roof*: The closing

of the windows and tilt/sliding panel* can

be immediately halted by releasing

the

: button.

A window, the tilt/sliding sunroof*, or the

tilt/sliding panel* will only return to its previous
position if it has not been moved to another
position using the respective window switch or
tilt/sliding sunroof* (or tilt/sliding panel*)
switch after it was closed with button