Mercedes-Benz R-Class 2007 Owners Manual - Manual (Page 119)

118
Controls in detail
Locking and unlocking
ț If the SmartKey with KEYLESS-GO is
removed from the vehicle (e.g. if a
passenger exits the vehicle with the
SmartKey with KEYLESS-GO)
ț when pressing the KEYLESS-GO
start/stop button or trying to lock
the vehicle with the lock button on
an outside door handle, the mes-
sage
Key not detected appears in
the multifunction display
ț with the engine running, the mes-
sage
Key not detected appears in
the multifunction display while
driving off
Find the SmartKey with KEYLESS-GO or
change its present location immediate-
ly (e.g. place it on the front passenger
seat or insert it in shirt pocket).
ț If you have started the engine with the
KEYLESS-GO start/stop button
(
୴ page 55), you can turn it off again
with
ț the KEYLESS-GO start/stop button
(
୴ page 67)
ț the SmartKey inserted in the starter
switch when the automatic trans-
mission is in position P
ț Remember that the engine can be
started by anyone with a SmartKey
with KEYLESS-GO that is left inside the
vehicle.
Possibility 1: (One SmartKey with
KEYLESS-GO in the vehicle, one
SmartKey with KEYLESS-GO outside
the vehicle):
If you leave the SmartKey with
KEYLESS-GO behind when exiting and
locking the vehicle, no message
appears in the multifunction display.
Possibility 2: (One SmartKey with
KEYLESS-GO in the vehicle, no
SmartKey with KEYLESS-GO outside
the vehicle):
When exiting and trying to lock the
vehicle, the message
Key detected in
vehicle will appear in the multifunction
display. The vehicle will not be locked.