Moextended system, Tire labeling, Operation – Mercedes-Benz CLK-Class 2009 Owners Manual User Manual
Page 249
Tires and wheels
247
Tire Pressure Monitor
Restarted
After driving a few minutes the system
verifies that the current tire inflation
pressures are within the system’s specified
range. Afterwards, the current tire inflation
pressures are accepted as reference values
and then monitored.
X
If you wish to cancel: Press button
ç
.
The MOExtended system allows you to
continue driving your vehicle even if there is
a total loss of pressure in one or more tires.
You may only use the MOExtended system in
conjunction with the Run Flat Indicator
(
For information on driving in case of pressure
loss in one or more tires (emergency mode),
see the “Practical Hints” section
(
Besides tire name (sales designation) and
manufacturer name, a number of markings
can be found on a tire.
Following are some explanations for the
markings on your vehicle’s tires:
1
Uniform Tire Quality Grading Standards
(
2
DOT, Tire Identification Number
(
3
4
Maximum tire inflation pressure
(
5
Manufacturer
6
7
Tire size designation, load and speed
rating (
8
9
Tire name
i
For illustration purposes only. Actual data
on tires are specific to each vehicle and
may vary from data shown in above
illustration.
For more information, see “Rims and
tires” (
Tire size designation, load and speed
rating
1
Tire width
2
Aspect ratio in %
Operation
Z