Luggage cover, Controls in detail – Mercedes-Benz CLK-Class 2009 Owners Manual User Manual
Page 199
Soft top (cabriolet)
197
3
Retainer claw
4
Snap fastener
X
Press retainer claw
3
on upper section
into snap fastener
4
of lower section.
5
Retaining lugs
6
Mounting fixture on right side
7
Catch
.
Locking
/
Unlocking
X
Fold retaining lugs
5
out.
X
Slide preassembled wind screen into
mounting fixture on right side
6
using
retaining pin on right side. Simultaneously,
retaining lugs
5
should slide into seat belt
passage in rear bench seat.
X
Pull catch
7
to position
.
and guide left
retaining pin into mounting fixture on left
side.
X
Fold upper section of wind screen up
toward head restraints until it stops.
Removing
X
Fold upper section of wind screen back
down.
X
Pull catch
7
to position
/
and pull wind
screen out toward front of vehicle.
Be careful not to damage the interior trim
with the guide tabs.
X
Fold retaining lugs
5
back.
1
Catch
X
Press catch
1
to the right and fold upper
and lower sections back.
X
Put the wind screen back into the storage
bag.
The luggage cover covers luggage/cargo in
the trunk.
!
To prevent damage to the soft top or
luggage/cargo when lowering the soft top:
R
Load trunk only to the height of the
luggage cover.
R
Do not permit luggage/cargo to push up
the closed luggage cover.
Controls in detail
Z