Mercedes-Benz CLK-Class 2009 Owners Manual - Manual (Page 123)

Instrument cluster
121
1 Reset button
For information on changing the instrument
cluster settings, e.g. the language, see
(
Y page 134).
Activating the instrument cluster
The instrument cluster is activated when you
R open a door
R switch on the ignition
R press reset button 1
R switch on the exterior lamps
Adjusting the instrument cluster
illumination
i The instrument cluster illumination is
dimmed or brightened automatically to suit
ambient light conditions.
The instrument cluster illumination will also
be adjusted automatically when you switch
on the vehicle’s exterior lamps.
X To brighten illumination: Turn reset
button 1 clockwise until the desired level
of illumination is reached.
X To dim illumination: Turn reset button
1 counterclockwise until the desired level
of illumination is reached.
Coolant temperature indicator
The coolant temperature indicator is located
on the right side in the instrument cluster
(
Y page 32).
G Warning!
Driving when your engine is overheated can
cause some fluids which may have leaked
into the engine compartment to catch fire.
You could be seriously burned.
Steam from an overheated engine can
cause serious burns which can occur just
by opening the engine hood. Stay away
from the engine if you see or hear steam
coming from it.
Stop the vehicle in a safe location away
from other traffic. Turn off the engine, get
out of the vehicle and do not stand near the
vehicle until the engine has cooled down.
During severe operating conditions, e.g. stop-
and-go traffic, the coolant temperature may
rise close to 248‡ (120†).
! Excessive coolant temperature triggers a
warning in the multifunction display and the
red coolant temperature warning lamp
D in the instrument cluster comes on.
The engine should not be operated with a
coolant temperature above 248‡ (120†).
Doing so may cause serious engine damage
which is not covered by the Mercedes-Benz
Limited Warranty.
Controls in detail
Z