Mercedes-Benz CLK-Class 2009 Owners Manual - Manual (Page 135)

Control system
133
The settings you have changed will not be
reset unless you confirm the action by
pressing the reset button a second time. After
approximately 5 seconds, the Settings
menu reappears in the multifunction display.
Resetting the functions of a submenu
For each submenu you can reset all the
functions to the factory settings.
X Move to a function in the submenu.
X Press the reset button ( Y page 121) in the
instrument cluster for approximately three
seconds.
The request to press the reset button once
more to confirm appears in the
multifunction display.
X Press the reset button once more.
All functions of the submenu will reset to
factory settings.
The settings you have changed will not be
reset unless you confirm the action by
pressing the reset button a second time. After
approximately five seconds, the Settings
menu reappears in the multifunction display.
Submenus in the Settings menu
X Press button è or ÿ repeatedly until
the Settings menu appears in the
multifunction display.
X Press button j .
The collection of the submenus appears in
the multifunction display. There are more
submenus than can be simultaneously
displayed.
X Press button ç .
The selection marker moves to the next
submenu.
X Scroll down with button ç , scroll up
with button æ .
X With the selection marker on the desired
submenu, use button
j to access the
individual functions within that submenu.
X Once within the submenu, use button
j to move to the next function or button
k to move to the previous function
within that submenu.
X Use button æ or ç to change the
settings of the respective function.
The following lists show what settings can be
changed within the various menus. Detailed
instructions on making individual settings can
be found on the following pages.
Instrument cluster submenu
R Selecting speedometer display mode
(
Y page 134)
R Selecting language ( Y page 134)
R Selecting display (speed or outside
temperature) for status line (
Y page 135)
R Selecting display (speed or outside
temperature) for standard display
(
Y page 135)
Time/Date submenu
R Setting the time ( Y page 135)
R Setting the date ( Y page 136)
Lighting submenu
R Setting daytime running lamp mode (USA
only) (
Y page 136)
R Setting locator lighting ( Y page 137)
Controls in detail
Z