Summer opening feature, Convenience closing feature, Feature – Mercedes-Benz C-Class 2009 Owners Manual User Manual
Page 113: Controls in detail
Power windows
111
X
Pull and hold the respective switch once
more immediately until the door window is
completely closed.
X
Hold the respective switch for
approximately 1 second.
The door window is synchronized.
If the weather is warm, you can ventilate the
vehicle before driving off by simultaneously:
R
opening the door windows
R
opening the tilt/sliding sunroof
R
opening the panorama roof and roller
sunblinds
The summer opening feature can only be
activated via the remote control of the
SmartKey. The SmartKey must be in close
proximity to the driver’s outside door handle.
X
Aim transmitter eye of the SmartKey at the
driver’s outside door handle.
Vehicles with tilt/sliding sunroof
X
Press and hold button
k
on the
SmartKey until the door windows and the
tilt/sliding sunroof have reached the
desired position.
The vehicle unlocks.
X
Release button
k
on the SmartKey to
interrupt the opening procedure.
Vehicles with panorama roof
When roller sunblinds are extended:
X
Press and hold button
k
on the
SmartKey.
The vehicle unlocks.
The door windows open and the roller
sunblinds begin to retract after
approximately 1 second.
X
With the door windows opened and the
roller sunblinds fully retracted, press and
hold button
k
on the SmartKey again.
The tilt/sliding panel opens.
X
Release button
k
on the SmartKey to
interrupt the opening procedure.
When roller sunblinds are retracted:
X
Press and hold button
k
on the
SmartKey.
The door windows and the tilt/sliding panel
opens after approximately 1 second.
X
Release button
k
on the SmartKey to
interrupt the opening procedure.
When locking the vehicle, you can
simultaneously close
R
the door windows
R
the tilt/sliding sunroof
R
the panorama roof
Afterward, you can extend the roller
sunblinds of the panorama roof.
When closing the door windows and the
tilt/sliding sunroof or panorama roof, make
sure there is no danger of anyone being
harmed by the closing procedure.
Controls in detail
Z