beautypg.com

Tec hni ca ldata, Service products and filling capacities – Mercedes-Benz S-Class 2014 Owners Manual User Manual

Page 425

background image

VIN

X

Open the front right-hand door.

X

Fold cover : down and remove it.

You will see the VIN.

The VIN can also be found in the following

locations:

R

on the lower edge of the windshield

(

Y

page 423)

R

on the vehicle identification plate

(

Y

page 422)

Engine number

:

Engine number (stamped into the

crankcase)

;

VIN (on the lower edge of the windshield)

=

Emission control information plate,

including the certification of both federal

and Californian emissions standards

Service products and filling

capacities

Important safety notes

G

WARNING

Comply with all valid regulations with respect

to handling, storing and disposing of service

fluids. Otherwise, you could endanger

persons or the environment.
Keep service fluids out of the reach of

children.
For health reasons, you should prevent

service fluids from coming into direct contact

with your skin or clothing.
If a service fluid is swallowed, contact a

physician immediately.

H

Environmental note

Dispose of service products in an

environmentally responsible manner.

Service products include the following:

R

Fuels

R

Lubricants (e.g. engine oil, transmission oil)

R

Coolant

R

Brake fluid

R

Windshield washer fluid

R

Climate control system refrigerant

Components and service products must be

matched. You should therefore only use

products that have been tested and approved

by Mercedes-Benz.
Information on tested and approved products

can be obtained at an authorized Mercedes-

Benz Center or on the Internet at

http://bevo.mercedes-benz.com.
You can recognize service products approved

by Mercedes-Benz by the following

inscription on the containers:

R

MB-Freigabe (e.g. MB-Freigabe 229.51)

R

MB Approval (e.g. MB Approval 229.51)

Other designations or recommendations

indicate a level of quality or a specification in

accordance with an MB Sheet number (e.g.

Service products and filling capacities

423

Tec

hni

ca

ldata

Z