beautypg.com

Wheels and tires, Changing a wheel – Mercedes-Benz SLK-Class 2015 Owners Manual User Manual

Page 338

background image

X

Unscrew the uppermost wheel bolt com-

pletely.

X

Screw alignment bolt : into the thread

instead of the wheel bolt.

X

Unscrew the remaining wheel bolts fully.

X

Remove the wheel.

Mounting a new wheel

G

WARNING

Oiled or greased wheel bolts or damaged

wheel bolts/hub threads can cause the wheel

bolts to come loose. As a result, you could

lose a wheel while driving. There is a risk of

accident.
Never oil or grease wheel bolts. In the event of

damage to the threads, contact a qualified

specialist workshop immediately. Have the

damaged wheel bolts or hub threads

replaced/renewed. Do not continue driving.

G

WARNING

If you tighten the wheel bolts or wheel nuts

when the vehicle is raised, the jack could tip

over. There is a risk of injury.
Only tighten the wheel bolts or wheel nuts

when the vehicle is on the ground.

Always pay attention to the instructions and

safety notes in the "Changing a wheel" sec-

tion (

Y

page 332).

Only use wheel bolts that have been designed

for the wheel and the vehicle. For safety rea-

sons, Mercedes-Benz recommends that you

only use wheel bolts which have been

approved for Mercedes-Benz vehicles and the

respective wheel.

!

To prevent damage to the paintwork, hold

the wheel securely against the wheel hub

while screwing in the first wheel bolt.

X

Clean the wheel and wheel hub contact

surfaces.

X

Slide the wheel to be mounted onto the

alignment bolt and push it on.

X

Tighten the wheel bolts until they are fin-

ger-tight.

X

Unscrew the alignment bolt.

X

Tighten the last wheel bolt until it is finger-

tight.

X

Vehicles with a collapsible spare wheel:

inflate the collapsible spare wheel

(

Y

page 342). Only then lower the vehicle.

Lowering the vehicle

G

WARNING

The wheels could work loose if the wheel nuts

and bolts are not tightened to the specified

tightening torque. There is a risk of accident.
Have the tightening torque immediately

checked at a qualified specialist workshop

after a wheel is changed.

336

Changing a wheel

Wheels

and

tires