beautypg.com

Lights and windshield wipers, Exterior lighting – Mercedes-Benz SLK-Class 2015 Owners Manual User Manual

Page 114

background image

The cornering lamp may remain lit for a short

time, but is automatically switched off after

no more than three minutes.

Active light function

The active light function is a system that

moves the headlamps according to the steer-

ing movements of the front wheels. In this

way, relevant areas remain illuminated while

driving. This allows you to identify pedes-

trians, cyclists and animals.
Active: when the lights are switched on.

Adaptive Highbeam Assist

General notes

You can use this function to set the head-

lamps to change between low beam and high

beam automatically. The system recognizes

vehicles with their lights on, either approach-

ing from the opposite direction or traveling in

front of your vehicle, and consequently

switches the headlamps from high beam to

low beam.
The system automatically adapts the low-

beam headlamp range depending on the dis-

tance to the other vehicle. Once the system

no longer detects any other vehicles, it reac-

tivates the high-beam headlamps.
The system's optical sensor is located behind

the windshield near the overhead control

panel.

Important safety notes

G

WARNING

Adaptive Highbeam Assist does not recognize

road users:

R

who have no lights, e.g. pedestrians

R

who have poor lighting, e.g. cyclists

R

whose lighting is blocked, e.g. by a barrier

In very rare cases, Adaptive Highbeam Assist

may fail to recognize other road users that

have lights, or may recognize them too late. In

this or similar situations, the automatic high-

beam headlamps will not be deactivated or

activated regardless. There is a risk of an acci-

dent.
Always carefully observe the traffic conditions

and switch off the high-beam headlamps in

good time.

Adaptive Highbeam Assist cannot take into

account road, weather or traffic conditions.

Adaptive Highbeam Assist is only an aid. You

are responsible for adjusting the vehicle's

lighting to the prevailing light, visibility and

traffic conditions.
In particular, the detection of obstacles can

be restricted if there is:

R

poor visibility, e.g. due to fog, heavy rain or

snow

R

dirt on the sensors or the sensors are

obscured

112

Exterior lighting

Lights

and

windshield

wipers