On -b oar d comp ut er an d di sp lay s, Display messages – Mercedes-Benz SLK-Class 2015 Owners Manual User Manual
Page 234
Display messages
Possible causes/consequences and M
M Solutions
Lane Keeping
Lane Keeping
Assist Currently
Assist Currently
Unavailable See
Unavailable See
Operator's Manual
Operator's Manual
Lane Keeping Assist is deactivated and temporarily inoperative.
Possible causes are:
R
the windshield in the camera's field of vision is dirty.
R
visibility is impaired due to heavy rain, snow or fog.
R
there are no lane markings for a longer period.
R
the lane markings are worn, dark or covered, e.g. by dirt or snow.
When the causes stated above no longer apply, the display mes-
sage disappears.
Lane Keeping Assist is operational again.
If the display message does not disappear:
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (
Y
page 161).
X
Clean the windshield.
Lane Keeping
Lane Keeping
Assist Inoperative
Assist Inoperative
Lane Keeping Assist is faulty.
X
Visit a qualified specialist workshop.
Blind Spot Assist
Blind Spot Assist
Currently Unavail‐
Currently Unavail‐
able See Opera‐
able See Opera‐
tor's Manual
tor's Manual
Blind Spot Assist is temporarily inoperative. Possible causes are:
R
the sensors are dirty.
R
function is impaired due to heavy rain or snow.
R
the radar sensor system is outside the operating temperature
range.
R
the radar sensor system is temporarily inoperative, e.g. due to
electromagnetic radiation emitted by nearby TV or radio sta-
tions or other sources of electromagnetic radiation.
The yellow 9 indicator lamps also light up in the exterior mir-
rors.
When the causes stated above no longer apply, the display mes-
sage disappears.
Blind Spot Assist is operational again.
If the display message does not disappear:
X
Pull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
X
Secure the vehicle against rolling away (
Y
page 161).
X
Clean the sensors (
Y
page 287).
X
Restart the engine.
232
Display messages
On
-b
oar
d
comp
ut
er
an
d
di
sp
lay
s