Br eak down assis ta nce, Towing and tow-starting – Mercedes-Benz SLK-Class 2015 Owners Manual User Manual
Page 306
ignition lock and shift the automatic trans-
mission to N. Then, turn the SmartKey back
to 0 and leave it in the ignition lock.
!
Make sure that the electric parking brake
is released. If the electric parking brake is
faulty, visit a qualified specialist workshop.
!
The vehicle can be towed a maximum of
30 miles (50km). The towing speed of
30 mph (50 km/h) must not be exceeded.
If the vehicle has to be towed more than
30 miles (50km), the entire vehicle must be
raised and transported.
!
If you tow or tow-start another vehicle, its
weight must not exceed the maximum per-
missible gross vehicle weight of your vehi-
cle.
i
Information on your vehicle's gross vehi-
cle weight rating can be found on the vehi-
cle identification plate (
Y
page 346).
It is better to have the vehicle transported
than to have it towed.
Vehicles with automatic transmission:
when towing a vehicle, the automatic trans-
mission must be in position N.
The battery must be connected and charged.
Otherwise, you:
R
cannot turn the SmartKey to position 2 in
the ignition lock
R
cannot shift the transmission to position N
on vehicles with automatic transmission
Vehicles with automatic transmission:
release the selector lever lock manually to
move it out of position P (
Y
page 158).
i
Disarm the automatic locking feature
before the vehicle is towed (
Y
page 207).
You could otherwise be locked out when
pushing or towing the vehicle.
Installing/removing the towing eye
Installing the towing eye
G
WARNING
The exhaust tail pipe may be very hot. There is
a risk of burns when removing the rear cover.
Do not touch the exhaust pipe. Take particular
care when removing the rear cover.
The mountings for the removable towing eyes
are located in the bumpers. They are at the
front and at the rear, behind the covers.
X
Press the mark on cover : inwards in the
direction of the arrow.
X
Take cover : off the opening.
X
Remove the towing eye from the vehicle
tool kit (
Y
page 292).
X
Screw in and tighten the towing eye clock-
wise to the stop.
Removing the towing eye
X
Unscrew and remove the towing eye.
X
Attach cover : to the bumper and press
until it engages.
X
Place the towing eye in the vehicle tool kit
(
Y
page 292).
304
Towing and tow-starting
Br
eak
down
assis
ta
nce