Mercedes-Benz SLK-Class 2015 Owners Manual - Manual (Page 149)

SLK 350
The engine starts automatically if:
R you switch off the ECO start/stop function
by pressing the ECO button.
R
in transmission position D or N the brake
pedal is released and the HOLD function is
not active.
R
you depress the accelerator pedal.
R
you engage reverse gear R.
R you move the transmission out of position
P.
R you unfasten your seat belt or open the
driver's door.
R
the vehicle starts to roll.
R the brake system requires this.
R the temperature in the vehicle interior devi-
ates from the set range.
R the system detects moisture on the wind-
shield when the air-conditioning system is
switched on.
R the battery's condition of charge is too low.
i Shifting the transmission to position P
does not start the engine.
SLK 55 AMG
The engine starts automatically if:
R you switch off the ECO start/stop function
by pressing the ECO button.
R in transmission position D or N the brake
pedal is released and the HOLD function is
not active.
R
you depress the accelerator pedal.
R
you engage reverse gear R.
R you move the transmission out of position
P.
R you switch to drive program S or M.
R
you unfasten your seat belt or open the
driver's door.
R the vehicle starts to roll.
R the brake system requires this.
R the temperature in the vehicle interior devi-
ates from the set range.
R the system detects moisture on the wind-
shield when the air-conditioning system is
switched on.
R the battery's condition of charge is too low.
i Shifting the transmission to position P
does not start the engine.
i If you shift the transmission from R to D,
the ECO start/stop function is available
again once the è ECO symbol reap-
pears in green in the multifunction display.
Deactivating/activating the ECO start/
stop function
SLK 250
X To deactivate: press ECO button :.
Indicator lamp ; and the è ECO sym-
bol in the multifunction display go out.
X
To activate: press ECO button :.
Indicator lamp ; lights up.
If all conditions for automatic engine
switch-off (
Y
page 144) are fulfilled, the
è ECO symbol is shown in green in the
multifunction display.
If not all conditions for automatic engine
switch-off (
Y
page 144) are fulfilled, the
è ECO symbol is shown in yellow in the
multifunction display.
If this is the case, the ECO start/stop func-
tion is not available.
Conditions for the automatic engine
switch-off (
Y
page 144).
Driving
147
Driving
and
parking
Z