beautypg.com

Lights and windshield wipers, Windshield wipers – Mercedes-Benz SLK-Class 2015 Owners Manual User Manual

Page 120

background image

3

Å Intermittent wipe, high (rain sensor

set to high sensitivity)

4

° Continuous wipe, slow

5

¯ Continuous wipe, fast

B

í Single wipe/î To wipe the wind-

shield using washer fluid

X

Switch on the ignition.

X

Turn the combination switch to the corre-

sponding position.

In the Ä or Å position, the appropriate

wiping frequency is set automatically accord-

ing to the intensity of the rain. In the Å

position, the rain sensor is more sensitive

than in the Ä position, causing the wind-

shield wipers to wipe more frequently.
If the wiper blades are worn, the windshield

will no longer be wiped properly. This could

prevent you from observing the traffic condi-

tions, thereby causing an accident.

Replacing the wiper blades

Important safety notes

G

WARNING

If the windshield wipers begin to move while

you are changing the wiper blades, you could

be trapped by the wiper arm. There is a risk of

injury.
Always switch off the windshield wipers and

ignition before changing the wiper blades.

!

To avoid damaging the wiper blades,

make sure that you touch only the wiper

arm of the wiper.

!

Never open the hood if a windshield wiper

arm has been folded away from the wind-

shield.
Never fold a windshield wiper arm without a

wiper blade back onto the windshield.
Hold the windshield wiper arm firmly when

you change the wiper blade. If you release

the windshield wiper arm without a wiper

blade and it falls onto the windshield, the

windshield may be damaged by the force of

the impact.
Mercedes-Benz recommends that you have

the wiper blades changed at a qualified

specialist workshop.

!

Always position the windshield wiper

arms vertically before folding them away

from the windshield. By doing so, you will

avoid damage to the hood.

Replacing the wiper blades

Removing the wiper blades

X

Turn the SmartKey to position 1 or 2 in the

ignition lock (

Y

page 139).

X

Set the windshield wipers to position °.

X

When the wiper arms have reached a ver-

tical position, turn the SmartKey to position

0 and remove it from the ignition lock

(

Y

page 139).

X

Fold the windshield wiper arms away from

the windshield.

X

Press both release clips ;.

X

Fold wiper blade : in the direction of

arrow = away from wiper arm ?.

X

Remove wiper blade : in the direction of

arrow A.

118

Windshield wipers

Lights

and

windshield

wipers